Sale!
,

2×4 HDMI Splitter Milestone Pro

Original price was: ₹10.00.Current price is: ₹1.00.

  • Supports HDMI 2.0 and video resolution up to 4K@60Hz 4:4:4.
  • HDMI inputs support HDCP 2.2 and the outputs support HDCP1.4.
  • Fully compliant with the HDMI 2.0 and HDCP 2.2 specifications.
  • Supports video resolution down-scaling, the 4K input can be automatically degraded to 1080P output for compatibility with 1080P display.
  • 18Gbps high bandwidth.
  • Features RCA (L/R) jack and Toslink connector for audio de-embedded.

MP-DA24UHD is a HDMI 2.0 2×4 Splitter, which can distribute either one of two HDMI inputs to four outputs. It supports HDMI video resolution up to 4K@60Hz 4:4:4, 1080P 3D and multichannel audio formats. Except passing EDID information from the display, there are multiple built-in EDID settings can be selected by the 4-pin DIP switch on the rear panel. It can de-embed HDMI digital audio to stereo analog L/R and Toslink SPDIF audio outputs to provide audio sources for existing audio system

Video Input
Input(2) HDMI
Input Connector(2) Female type-A HDMI
HDMI Input ResolutionUp to 4Kx2K@60Hz 4:4:4 8bit
HDMI Standard2.0
HDCP Version2.2
CECSupported
Video Output
Output(4) HDMI
Output Connector(4) Female type-A HDMI
HDMI Output ResolutionUp to 4Kx2K@60Hz 4:4:4 8bit
HDMI Standard2.0
CECSupported
Audio
De-embedded Output(1) AUDIO OUT; (1) SPDIF OUT
Output Connector(1) RCA (L/R) jack; (1) Toslink connector
HDMI Audio FormatLPCM 7.1 audio, Dolby Atmos®, Dolby® TrueHD, Dolby Digital® Plus, DTS:X™, and DTS-HD® Master Audio™ pass-through.
Stereo Analog L/R Audio FormatPCM
Toslink Digital Audio FormatPCM, Dolby Digital, DTS, DTS-HD
Frequency Response20Hz ~ 20KHz, ±3dB
Max Output Level2.0Vrms ± 0.5dB. 2V = 16dB headroom above -10dBV (316mV) nominal consumer line level signal
THD+N<0.05% (-80 dB), 20Hz ~ 20KHz bandwidth, 1KHz sine at 0dBFS level (or max level)
SNR>80dB, 20Hz ~ 20KHz bandwidth
Crosstalk Isolation>70dB, 10KHz sine at 0dBFS level (or max level before clipping)
L-R Level Deviation< 0.3dB, 1KHz sine at 0dBFS level (or max level before clipping)
Frequency Response  Deviation<± 0.5dB 20Hz ~ 20 KHz
Output Load Capability1K ohm and higher (supports 10x paralleled 10k ohm loads)
Stereo Channel Separation>70dB@1kHz
Control
Control Part(5) Control buttons; (1) EDID 3-pin DIP switch; (1) EDID 4-pin DIP switch; (1) Micro-USB port
General
Bandwidth18Gbps
Operation Temperature-10℃ ~ +55℃
Storage Temperature-25℃ ~ +70℃
Relative Humility10%-90%
Power SupplyInput:100V~240V AC; Output: 12V DC 1A
Power Consumption12W(Max)
Dimension (W*H*D)232mm x 20mm x 100mm
Net WeightAbout 660g

Reviews

There are no reviews yet.

Be the first to review “2×4 HDMI Splitter Milestone Pro”

Your email address will not be published. Required fields are marked *